Formulated with a blend of non-acid surfactants and water conditioning agents to inhibit build up of soap residue, hard water deposits and other soils associated with showers, this product is safe and effective on all natural stone and tile. Bath & Shower Cleaner is designed for use on shower walls, floors, glass and acrylic shower doors.

Directions: Always test a small area to check for desired outcome.
1. Mix one part to four parts water (1:4).
2. Spray surface and allow solution to remain in contact with the surface for 5 to 10 minutes.
3. Scrub area to be cleaned with a soft bristle brush to break up and remove soils.
4. Rinse the area with clear water.
5. Pick up or wipe off any remaining residue.
On areas where accumulation is heavy, more than one application may be required.
For cleaning lavatories, drinking fountains, bath tubs and shower stalls, apply freely with sprayer, sponge or soft brush. Scour gently with soft brush. Rinse well with clean water.

CAUTION: Causes eye and skin irritation. Avoid contact with skin, eyes and clothes. In case of contact,flush thoroughly with water. If irritation persists, seek medical attention. Do not swallow. Keep out of reach of children.