Specs:
- Polishes quickly
- Hardens surface
- Protects
- Can help eliminate grout haze on new installations
What Our Pros Say:
ELEVATE YOUR MARBLE RESTORATION: HOW 5X, XXX SHINE, DIABRITE 10X, AND MPC POLISHING POWDERS MAKE A DIFFERENCE
Tips on Marble Polishing: This article covers essential marble polishing powders and compounds, including tips for selecting the right products, using them effectively, and achieving optimal results...
Read More
Label Information:
DiaBrite 10X is an aggressive polishing product for restoration professionals to be used on calcium based stones such as marble, travertine, polished limestone, and terrazzo. It is a non-wax product that will polish, harden, and help protect. The unique blend of polishing agents will speed up the process. Contains: Oxalic acid dihydrate (CAS#6153-56-6), Sulfer (CAS#7704-34-9), Magnesium hexafluorosilicate (CAS#16949-65-8) Danger Causes serious eye damage. Harmful if swallowed. Causes skin irritation. Precautionary Statement Prevention: Wash face and hands thoroughly after handling. Wear protective gloves/protective clothing/eye protection/face protection. Do not eat, drink or smoke when using this product. Response: IF SWALLOWED: immediatley call a POISON CENTER or doctor/physician. Rinse mouth. IF ON SKIN: Wash with plenty of soap and water. If sking irritation occurs: Get medical advice/attention. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediatley call a POISON CENTER or doctor/physician. Disposal: Dispose in accordance with the local, regional, national and/or international regulations. (See SDS sheet) precautions before using this product. Use On: All uncoated calcium based stone capable of taking a polish. Equipment: Slow speed (145 rpm-175rpm) heavy duty floor machine, natural pad, commercial wet vacuum, mop and bucket with ringer and floor squeegee. Coverage: 100-150 sq. ft. per pound Always test in inconspicuous area prior to general use. For professional use only! Application: Protect all adjacent acid sensitive areas by masking off. Use a slow speed (145-175 rpm) heavy duty floor machine with a natural pad, commercial wet vacuum, mop and bucket with ringer, and floor squeegee. Make sure there are no coatings present. Wet area to be polished with clean water (about 10-15 sq. ft.), apply approximately 3 ounces of DiaBrite10X and buff using the floor machine with natural pad for about 10 minutes. The slurry should thicken. Squeegee back the slurry and check for desired gloss. When desired gloss is achieved, squeegee slurry to next area after pre-wetting. Wet vacuum finished area, flood rinse with clean water, buff again with same pad, wet vacuum again, damp mop and let dry. Complete large areas in a checkerboard fashion overlapping areas to blend. Add DiaBrite 10X as needed to each area to achieve desired polish. Buffing with a white pad after completion helps luster. Variables include amount of DiaBrite 10X, amount of water, and number of passes or time. Some experimentation will be necessary.
|